No Products in the Cart
Gplug Small is one of the smallest rechargeable butt plugs on the market!
It has a diameter of 3 cm (1.1 in) and this makes it a very attractive selling size for anal toys.
Gplug also comes in Large size 3.9 cm (1.54 in).
Specially developed for extra pleasure seekers.
The rechargeable plug was presented by FunToys in 2013 at Erofame show and at the time there were no similar products on the market.
Using Gplug without remote control
To turn off the Gplug you will have to go through allvibration modes until it stops vibrating.
Here is how it looks like: Press one time and this will set mode #1. Press one more time and
then you will be at mode #2, then by pressing again and again you will go through mode 3,
mode 4, mode 5, mode 6 and then you will reach the OFF mode.
Gplug controlled by Gring remote control
You can also use Gring as a remote control for your Gplug toy. Due
to its positioning on the finger, you can easily navigate between the
modes, while enjoying the pleasure from the Gplug.
– Turn off both the Gplug and the Gring.
– Press the Start button on the Gplug for 2 seconds. Then the LED
will start flashing, meaning that the toy is already in the remote mode.
Press the Plus «+» button on the Gring to turn it on.
– Gring will connect to your toy.
Now you can control your Gplug with the Gring in the following manner:
Start and increase vibration power:
Decrease power of vibration:
Change between 6 different modes by pressing the Mode Switch button.
When you press the Switch Mode button for 3 seconds, you
can switch off the vibration on Gring while Gplug will be still
in a remote mode. The LED lights on the Gring will be
flashing all the time. To start the vibration on Gring again,
simply press and hold the Switch Mode for two seconds
Press the Start button on the Gplug for 2 seconds and then it will
set a non-remote mode. This means that you are manually
controlling the toy.
There is no need of pressing anything
on the Gring. It will go automatically
to a «non-remote» mode.
– Place the two dots end of the charger to the designated dots on the toy. The USB end of the
charger should go to USB exit on your computer or socket adaptor.
– While you are charging the Gplug the LED light will be flashing. When the toy is fully charged
the light will stay continuous.
– During the charging process, the buttons will not be working and the toy cannot be used.